Pivot Type Fully Automatic Column Band Saw
The fully-automatic column horizontal sawing machine series are incorporated with advantages of reasonable structure, stable and reliable performance, and high precision. It is an ideal equipment for cutting a variety of materials of small to medium lots.
| Parameter | Unit |
| Working capacity(solid round bar) | mm |
| Working capacity(solid square bar) | mm |
| Cutting height | mm |
| Cutting depth | mm |
| Blade size | mm |
| Index length | mm |
| Floor space(LxW) | mm |
| Machine weight | kg |
S-300HB 300 300 x 250 30 - 130 145 x 230 3820 x 34 x 1.1 400 2100 x 2200 1550
Digital readout index
Index length is easily set in seconds with a hand wheel mounted to the front of the machine. Minimum increment is 0,025 mm.
Roller bearing + carbide guide blocks
Roller guides serve as a pre guides to take the twist out of the blades before the blade goes through the spring loaded and flat carbide side guides with internal coolant.
Infinitely variable speed
Blade speed is regulated by hand wheel within easy reach of the operator. Speeds are infinitely variable to handle a full range of materials from nickel based alloys to aluminum.
Free standing roller table
The roller stock table includes 2 sets of double adjustable vertical guide rollers and slide bars: used with nesting fixture attachment.
Programmable control (optional)
Programmable control allows you to program 9 different jobs with job number, number of cuts and cutting length, eliminating extensive set-up time. The NC controller also incorporates automatic kerf compensation.
Split front vise
This unique vise design permits the workpiece to be automatically indexed to a barred remnant of 50 mm. The vise securely clamps the workpieces on both sides of the cut thus drop-off the burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.
Hydraulic blade tension
Hydraulically operated full stroke control for the dual vise clamping system. This unique device permits the workpiece to be automatically indexed to reduce remnant size. The vise securely clamps the workpiece on both sides of the cut, thus minimizing drop-off burrs.
Automatic chip conveyor (optional)
By removing chips from the cutting area, chip build-up is eliminated and maximum productivity is enable.
Nesting fixture for bundle cutting
A nesting fixture set consists of hydraulic clamps which may be mounted to both the index and the front vises. This makes it possible to cut multiple pieces at one time.
